How to use the Labeling Machine?

As more and more companies adopt labeling machines, machines have been well applied and developed. At present, as a relatively common packaging machine, fully automatic machines have entered the packaging of many products. Continuously provide users with convenient and efficient packaging services. So how should the labeling machine be used? What should I pay attention to during use?

How to use the labeling machine?

Notes on the use and operation of the labeling machine

1、How to use the labeling machine?

①General control of machine: It must be clean.

②Turn on the glue heater and control the set temperature.

③Check the oil level and remove water condensate. Connect the compressed air pipeline and adjust the pressure to 5-6 atmospheres.

④Check whether the glue pump is running normally, the amount of glue must be adjusted according to the maximum speed of the labeling machine per minute, and the label box must be filled with label paper.

⑤Check the number of bottles at the entrance. This number must be sufficient for the label to run at the minimum speed.

⑥Check that all components and adjustment devices are placed on the corresponding size and position of the machine.

⑦Check that the mushroom-shaped emergency stop button has not been pressed.

⑧Finally turn on the main switch.

2、Notes on the use and operation of the labeling machine

It is composed of a labeling wheel and a reel. Its working principle is that the driving wheel intermittently drags the label tape to move. The label tape is pulled out from the reel, and at the same time the label tape is pressed by the labeling wheel. On the box. Then, on the basis of understanding the working principle, let's see what needs to be paid attention to.

Confirm the conveying direction of the conveyor belt and the conveying direction.

Whether the placement direction of the product on the production line and on the automatic labeling machine is the same.

Ensure that the product runs and the labeling direction is consistent.

The output and line speed of the production line should be synchronized with the automatic machine.

The height of the conveying surface is appropriate.

Whether there are special requirements for connection with other machines in the production line and interfaces.

Is there enough space reserved for the labeling machine in the packaging production line?

Ensure that the winding direction of the label roll is correct.

It can be seen from the above that the labeling machine is a relatively sophisticated equipment, paying attention to details. If you do not master the correct use in daily production activities, it is easy to cause damage. Therefore, it is necessary to strengthen the training of relevant personnel to avoid this situation.

The labeling machine is an indispensable equipment for commodity packaging. Using the labeling machine can not only bring high production efficiency to the enterprise, but also save production costs. If you want to know more information, you can click on the official website to view the information.