How to solve common problems of labeling machine？

As we have seen in our lives, labeling machines are more and more commonly used in many industries, but as time goes by, more or less machine failures will occur, so we must deal with some common problems and The solution is understood.

No response at boot

Why does the labeling machine fail to produce the label and its solution?

How to solve the deviation of the labeling machine during the labeling process?

What should I do if the labeling quality of the lableing machine is not good, there are bubbles or wrinkles?

The motor of the machine keeps rotating

1. No response at boot

Confirm that there is no problem with the power cord.

Make sure that the fuse next to the power outlet is intact.

It is possible that the wiring inside the electric box is loose, please ask a professional to repair.

2. Why does the labeling machine fail to produce the label and its solution?

The position of the electric eye is wrong, adjust the position of the electric eye.

The electric eye of the object to be measured is faulty, replace the electric eye of the object.

The labeling head label pull paper is not long enough.

The color of the object cannot be sensed by the electric eye. Replace the electric eye with a suitable model and function.

The label feeder is not open. Turn on the label feeder.

3. How to solve the deviation of the labeling machine during the labeling process?

The pressure belt device is too tight, causing the label tape to be misaligned. Just relax the pressure belt

Before the automatic operation, the tape deviation is not corrected, and the correction can be performed again.

The standard stripping board is skewed and the label tape is misaligned, just adjust the stripping board.

The product is not upright, replay the product.

The support rod is not parallel to the axis of the bottle, and the bottle deviates during rotation. Adjust the parallelism to ensure that the bottle does not shift when rotating.

4. What should I do if the labeling quality of the labeling machine is not good, there are bubbles or wrinkles?

The labeling wheel may not be parallel to the surface to be laminated, just adjust the labeling wheel.

The delivery speed is not matched with the delivery speed and the overwriting speed. Most of the delivery speeds are too fast. Re-adjust the delivery speed or delivery speed to make the speed consistent. To

The label strength is not enough, it is easy to wrinkle during the labeling or labeling process, so the strength of the label should be strengthened.

If the attached product has dust or is not qualified or the label viscosity is not enough, clean the product or replace it.

5. The motor of the machine keeps rotating

Generally, the tag cannot be recognized because of abnormal detection of the target sensor. Then you need to observe whether the passing position of the label is detected by the target sensor. Or the sensor is damaged, then you need to replace the sensor with a new one.

Or the speed of the motor separating the label is too fast, and there is no gap between the label and the label, which interferes with the detection. We can adjust by reducing the speed of the motor.

Have you learned the common failures and problems of labeling machines? Our company's labeling machines are all developed by a professional R&D team and have obtained relevant tests. So no matter what type of labeling machine you need, you can come to our company with confidence. We will surely let you buy and use it at ease.