How to disinfect Blow Molding Machine?

Bottle blowing machine refers to a machine that blows bottles. The most simple explanation is a machine that can blow plastic particles (softened into liquid) or finished preforms into bottles through certain technological means. The bottle blowing machine is convenient and quick, and has a large amount of molding. After it appeared, it replaced most of the manual blowing and was adopted by most beverage companies. So how is the blow molding machine operated and disinfected? What are the characteristics of the blow molding machine? Which blow molding machines does the company provide?

 

How is the blow molding machine operated and disinfected?

What are the characteristics of the blow molding machine?

Which blow molding machines does the company provide?

 

How is the blow molding machine operated and disinfected?

(1) Before starting each shift, lubricating oil must be added to each movable part once. (Manipulator, manipulator guide rail, mold opening and closing guide rail)

(2) The swing arm can be added once every (3-4) days. The large chain and small chain of the heating machine can be used once a month. Frequently check whether the reducer of the main engine and the reducer of the heating machine are short of oil. The main engine bearing can be added once every 3 months.

(3) Before production, check whether the moving parts are firm, whether the screws are loose and fall off, especially in places with strong impact, whether the belt drive part is abnormal.

(4) Check whether the high-pressure gas source, low-pressure gas source, power source, and water source are normal.

(5) Check whether each emergency stop switch, safety door switch, and protection device detection switch are normal.

(6) Check whether the heating head enters the embryo and the embryo drop is working properly. If the embryo insertion is not in place, the nut of the embryo pressing device can be adjusted.

(7) Check whether the lamp tube is damaged or broken. It should be replaced in time.

(8) Check whether the pneumatic components are leaking and whether their movements are sensitive.

(9) Check whether the triplet is abnormally leaking, whether it is blocked, and whether the water cup is too full.

(10) When the solenoid valve of the automatic bottle blowing machine encounters an abnormality, it should be cleaned in time (cleaning once every 3.5 million bottles).

 

What are the characteristics of the blow molding machine?

The blow molding machine adopts oil-free airbag mold clamping technology, which has large clamping force, less force in toggle operation and long life. The bottle blowing machine adopts the patented fly-out sealing technology, which makes the sealing easier, especially the wide-mouth bottle.

 

Which blow molding machines does the company provide?

Zhangjiagang Sikai Machinery Co., Ltd. provides many types of blow molding machines, including: 2L PET bottle manual blow molding machine, 5 gallon mineral water bottle blow molding machine, semi-automatic blower — heater plastic bottle blow molding machine, 25L Semi-automatic water bottle blowing machine, etc.

 

If you want to buy a bottle blowing machine, you can consider our company, which will provide you with the best products and services.