English 
Views: 0 Author: Site Editor Publish Time: 2020-09-01 Origin: Site
In the production process, the water filling machine is well known and widely used in food and pharmaceutical processing. However, if the water filling machine is used improperly during the production process, it will not only affect the subsequent use of the machine, but also affect the quality of the machine. When using the filling machine, we should learn how to disinfect and clean the filling machine.
The disinfection and cleaning methods of the water filling machine are as follows:
Disinfection and cleaning of specific parts of the water filling machine
Precautions for water filling machine
About the summer maintenance of the water filling machine:
The disinfection and cleaning methods of the water filling machine are as follows:
First rinse with warm water to remove some obvious dirt, and then rinse with chlorine water, which can kill some bacteria and have a disinfection effect. Rinse carefully with warm water one or more times.
1. Loosen the upper and lower set screws, remove the liquid injection system for overall disinfection, or disassemble for disinfection and cleaning.
2. Put the inlet pipe in the cleaning solution and start the cleaning.
3. The 500ml model may have errors in the actual filling, so the measuring cylinder should be accurate before the formal filling.
4. Needle tube for filling machine, standard 5ml or 10ml syringe for type 10, 20ml glass filler for type 20, and 100ml glass filler for type 100.
1. After the machine is unpacked, first check whether the random technical information is complete and whether the machine is damaged during transportation, so as to solve it in time.
2. Install and adjust the feeding and discharging components according to the outline diagram in this manual.
3. Add new lubricant to each lubrication point.
4. Rotate the machine with the shaker to check whether the machine is running in the correct direction (counterclockwise when facing the motor shaft), and the machine must be grounded.
The summer is hot and rainy, which is easy to breed mosquitoes and bacteria, so the water filling machine needs to be cleaned and washed frequently during production and use; when cleaning, be careful not to scratch the surface of the water filling machine to avoid rust, otherwise it will be easy to contaminate Filling containers and liquids; if there are stains on the surface of the equipment, use alcohol and disinfectant cotton to scrub. The summer temperature is high, and the water filling machine is prone to various failures when running at high temperatures for a long time, which has a great impact on the work. Therefore, you should pay attention to the daily maintenance of the water filling machine to ensure that there are fewer problems.
Finally, the cylinder of the water filling machine is usually filled with lubricating oil before leaving the factory. Try to avoid disassembling and adding it by yourself, so as to avoid damage to the cylinder or leakage of lubricating oil; pay attention to the maintenance of the sealing ring of the filling machine, if found If it is abnormal, it should be replaced in time; the filled water filling machine should try to avoid long-distance closed transportation in summer and daytime.
