English 
Views: 0 Author: Site Editor Publish Time: 2020-10-27 Origin: Site
Most of the oily products have the characteristics of stickiness, plus they are edible. So the oil filling machine requirements for packaging it will be higher. In addition, the role of the filling machine is to fully expand its efficiency, but it takes a lot of time to clean this piece. Therefore, the cleaning process and efficiency of the filling machine are very important. We will briefly introduce the cleaning and maintenance of the oil filling machine.
How to clean the oil filling machine?
How to maintain the automatic edible filling machine?
Our products also have CIP internal cleaning system. The CIP process involves multiple stages, including the following main sequences. Initially rinse the equipment with clean hot water to be sure to clean oily items that are visible on the outside. The second step uses 80% caustic soda solution or 80% pressurized steam to circulate hot water at 80°C. Finally, disinfect the machine again with steam at 120°C or a cold water solution of 1.5% peracetic acid disinfectant.
After using the product, you can even remove the drip-proof filling nozzle. Our product is made of high-quality stainless steel, can be filled accurately without clogging, and can be disassembled for cleaning and maintenance.
If there is noise in the oil filling machine, it is likely that there is oil shortage or wear in the gears of the machine, and the oil needs to be replaced or added.
If you do not need to use the oil filling machine every day, just clean it after use. But you must remember to seal it to prevent impurities from mixing in the next time you use it.
If it has not been used for a long time, it is recommended that cleaning must be done.
After the work is completed, remember to turn off the power supply and the oil inlet valve in time.
The flow meter used in this machine is a precision instrument. Therefore, the oil must be accurately filtered before refueling.
The filling equipment should be isolated from other equipment. The lubrication part of the filling machine and the filling material part should be prevented from cross-contamination, and the conveyor belt should be lubricated with special soapy water or lubricating oil.
Before the filling machine works each time, use 0～1℃ water to reduce the temperature of the filling machine tank and the conveying pipeline. When the filling temperature exceeds 4℃, the temperature should be lowered first before the filling operation. The temperature must be kept constant during the work, so as not to cause excessive temperature changes and accidents.
It can be seen that cleaning plays a very important role in the entire process of the oil filling machine. Xiang our company also fully considered this issue, so if you need it, please feel free to contact.
